The repair and maintenance of carton machinery should be carried out by a certain number of technicians, which plays an important role and value in ensuring the quality and performance of carton machinery in use and in carton production. When the carton machinery is used, it shall be maintained and maintained according to certain methods and principles, and the different faults of the problem shall be solved in time. Attention shall be paid to adjusting and replacing the chain: the installation direction of the chain spring joint card shall be consistent with the chain operation, so as to avoid the impact of operation, beating, even collision and falling off.

2. After all parts are repaired, install and start the whole unit and observe whether the machine operates normally. Heat the drum properly, put a small amount of Carton packaging machine oil, melt it and cover the surface of the drum, and then cut off all power supply. If necessary, the carton can be coated on the mechanical and mechanical surface, wrapped with plastic paper and stored in a dry place.

3. Disassemble and clean all rolling bearings and add new grease. Calcium and sodium based grease can be used. Check whether there is smoke leakage from the mechanical furnace of the carton. In case of smoke leakage, check the roll retaining ring, furnace, chimney and other parts. If damage is found, it shall be repaired and replaced in time. For electric heating type, check whether the electric heating pipe is damaged and replace the damaged electric heating pipe.

Tom (oversea manager) Phone:0086 13303078975 / 17772697357(whatsapp,wechat,line)

Email :cartonmachine.tomwang@aliyun.com

https://www.wd-cartonmachine.com