water ink printing slotting machine is a machine that uses special ink to print patterns or text, usually used for printing items such as greeting cards, postcards, posters, advertisements, etc. When using a water ink printing machine, how to operate it correctly is crucial. Below, we will provide a detailed introduction to the operating steps of the water ink printing machine.

Preparation work:

Select appropriate ink; Determine printing materials; Check the printing machine components

flexo printer slotter die cutter machine Operating steps:

After completing the above preparation work, the official operation of the ink printing machine can begin.

Step 1: Install the ink cartridge

The first step is to install an ink cartridge, which is usually located on one side of the printing machine. Before replacing the ink cartridge, the old one needs to be removed and cleaned before installing a new one. When installing the ink cartridge, it is necessary to pay attention to the installation direction of the ink cartridge, and the ink cartridge needs to be correctly inserted into the ink cartridge holder.

Step 2: Add ink

After the ink cartridge is installed, ink can be added. Open the ink cartridge and slowly inject ink into it until the ink in the black cartridge is close to the top. During the process of adding ink, it is necessary to pay attention to the concentration of the ink not being too high or too low to ensure printing quality.

Step 3: Adjust the height of the printing head and printing bed

Adjusting the height of the printing head and printing bed is crucial and needs to be adjusted according to different material heights. Firstly, it is necessary to loosen the locking screws between the printing head and the printing bed, and then adjust the printing head and the printing bed to a suitable height and tighten the screws.

Step 4: Set printing parameters

Different printing materials and inks require different printing parameters to be set, such as printing head speed, temperature and humidity. These parameters can be set according to the actual situation.

Step 5: Perform printing testing

Before formal printing, a printing test is required to check the printing effect. After setting the printing parameters, place the paper or material to be printed on the printing bed, and then start the printing machine for printing testing. During the printing test process, it is necessary to observe the printing effect and adjust the printing parameters in a timely manner to obtain the best printing effect

Step 6: Start Printing

After the printing test is passed, formal printing can begin. During the printing process, it is necessary to pay attention to timely replenishing ink, adjusting printing parameters, and cleaning the printing head.

The above is a detailed explanation of the operating steps of the flexo water ink printing slotting die cutting machine, which needs to be strictly followed during operation. Only in this way can the quality of printed matter be guaranteed and the service life of the printing machine be extended.

If you are also interested in this machine,please don’t hesitate to contact us:

Overseas manager: Tom Wang

Email:cartonmachine.tomwang@aliyun.com

Phone/Wechat/Whatsapp:+86 13303078975