Hardboard production lines typically involve large mechanical equipment and complex production processes. Without strict safety regulations, employees may face various safety risks such as mechanical injuries, electric shocks, fires, etc. Safety regulations can regulate employees’ operational behavior, reduce the occurrence of accidents, and protect employees’ life safety and physical health.

The safety regulations for Four layer grey board production line mainly include the following aspects:

1. Personnel safety

Operators need to wear safety helmets and protective gloves, and it is strictly prohibited to operate in between.

Operators must wear work clothes with waistbands, sleeves, and safety shoes when going to work, as loose clothing such as coats can easily get caught in the exposed shaft of the machine and cause accidental injuries.

All employees must wear appropriate personal protective equipment during the production process, such as safety helmets, gloves, protective goggles, etc.

2. Equipment safety

Each device must undergo regular inspections to ensure its normal operation.

Before operating the equipment, the operator must receive training and hold a certificate before going on duty.

During the operation, it is strictly prohibited to stop or dismantle the equipment without authorization, and approval from the supervisor is required.

During the operation of the equipment, it is necessary to continuously monitor the production situation and promptly identify problems.

When the grey cardboard production line malfunctions, it is necessary to stop the machine in a timely manner and notify the maintenance personnel.

3. Production environment safety

The production site should be kept clean, and production waste should be regularly cleaned to prevent fire hazards.

Set up clear safety signs to ensure that employees follow safety instructions during the production process.

Regularly inspect fire-fighting equipment to ensure its integrity and effectiveness.

4. Safe operation process

Before starting up, check if the equipment is functioning properly, especially if the safety protection devices are intact.

It is strictly prohibited to carry out maintenance or adjustment during the operation of the equipment.

If any abnormal situation is found during the operation, the machine should be stopped immediately and reported to the supervisor.

After shutdown, check the grey paper hardboard production line status and ensure safety before leaving.

5. Emergency response process

Fire emergency: Upon discovering a fire, immediately activate the fire alarm and use fire extinguishers to extinguish small fires.

Emergency equipment failure: In case of equipment failure, the machine should be stopped immediately and maintenance personnel should be notified for handling.

Emergency response for personnel injury: Immediately provide first aid to the injured and send them to the hospital for medical treatment as soon as possible.

The above are the main contents of the safety regulations for cardboard production lines, and the specific regulations may vary depending on different production environments and equipment. Therefore, it is recommended to read and comply with relevant safety regulations and operation manuals in detail before actual operation.

If you are also interested in this machine,please don’t hesitate to contact us:

Overseas manager: Tom Wang

Email:cartonmachine.tomwang@aliyun.com

Phone/Wechat/Whatsapp:+86 13303078975