The printing materials we can see everywhere are all operated by High speed printing slotting die cutting machine. The printing press makes the real colors in our life well drawn. It also makes our environment more colorful and lively. It can be said that the printer is a mirror to copy our life. The printing press, as an important core equipment of the printing factory, is of high cost. It is particularly important and important for the use and maintenance of printing presses. After all, maintenance is also equivalent to extending service life and reducing costs

 The static maintenance of automatic flexo printer die cutter slotter machine can improve the work efficiency and reduce the production cost if it is well maintained. So what should we do at ordinary times? Let’s take a look.

 1、 Machine readiness detection. The readiness of the machine can be detected by inching or turning. Other items such as tools are stuck in the machine; Whether the installation position of the printing plate is appropriate. If not, it may damage the printing plate or make it difficult to find the rules; Whether the rubber blanket is installed properly. If it is not installed properly, it may cause printing failure, or even damage the machine.

 2、 Lubrication status of carton printing die cutting slotting machine. First of all, observe whether the oil circuit of the machine is leaking through the oil pointer. If the oil pointer is free of oil or the oil pointer cannot be observed clearly, stop the machine in an emergency and carefully check whether there is oil leakage in the oil circuit. Although it is easy to observe the oil leakage of the machine, it is difficult to find the cause. For machines such as sliding bearings, low speed is not conducive to their lubrication, especially for inching or low speed operation. Therefore, before such operation, oil and lubricate the idle machine, which is also a work that should be done before work every day. The oil pump of some machines is driven by the main engine, so when the reverse point occurs, the oil circuit will not be able to fill, but will suck the oil of the oil circuit back to the tank, which is very dangerous, so the reverse point should be avoided. The lubrication of some important parts can also be detected by the metal temperature nearby. If the temperature is too high, it indicates that there is a problem with lubrication.

 3、 Impact during machine operation. The smaller the impact during the operation of flexo printing die cutting slotting stacker machine, the better for printing, and the longer the service life of the machine. Reducing the printing pressure (pressure in broad sense) is an important condition for the smooth operation of the machine. On the premise of printing quality, the smaller the printing pressure is, the better. Reducing the speed of the machine is another important condition to reduce the rotational inertia of the machine. The lower the speed of the machine, the smaller the rotational inertia of the machine. Therefore, the machine should not be kept at high speed.