What are the safety operating procedures for  Automatic partition assembler machine ?

1. corrugated cardboard partition machine must be operated by professionally trained personnel in accordance with operating procedures.

2. Ensure that the mechanical moving parts of the Hebei grid insertion machine are well lubricated.

3. All fasteners must be securely connected.

4. Do not place any flammable or explosive materials to prevent dust, corrosive gases, and liquids from entering.

5. Compressed air must pass through a clean system before it can be pneumatically controlled or operated, otherwise it may be damaged. Bad machine parts.

6. The compressed air from the air compressor of the Hebei grid inserting machine enters the air storage tank, the main filter air dryer air source regulating device, and the pneumatic control or actuator.

7. Before debugging the Hebei grid insertion machine, carefully inspect the debris on the machine and check if all electrical components are loose during transportation, especially the wiring screws. If there is, they must be firm.

If you are also interested in this machine,please don’t hesitate to contact us:

Overseas manager: Tom Wang

​

Email:cartonmachine.tomwang@aliyun.com

Phone/Wechat/Whatsapp:+86 13303078975