Die cutting machine is a kind of Carton machinery and equipment, which has important advantages in the directed die-cutting process. Good technical parameters promote its continuous use in the carton industry, adopt different paper forms for cutting, meet the paper processing and printing forms, and adopt important conveying and manufacturing processes to process different cartons to meet the use needs of the printing industry.

Operation skills of manual flat pressing die cutting machine:

In actual operation, the plate loading method and materials used are not exactly the same. The plate can be loaded scientifically according to practice, and the printing plate can be checked: before going on the machine, comprehensively check whether the height and specification of the plate meet the dimensional requirements of the die-cutting and indentation machine, whether the wooden pillow plug is tight, whether the plate is flat, and whether there is arching. After passing the inspection, install the plate on the machine. The manual flat press die-cutting machine produces different operations in different process steps in the plate loading process. It needs to load the plate according to the form standard, which can be used in the carton printing process.

Initial pad knife line: roll another piece of paper. If a straight knife or die knife cannot come out, or the copper or iron sheet printed by the knife is padded behind the knife. After several times of re padding the paper plate until the knife print is clear, then cut off the knife print part with a rolled box blank paper, brush the paste and stick it behind the plate, and then compress the iron frame with a spiral. Making backing plate: the embossed plate on the die-cutting machine shall be cleaned, the adhesion must be removed, and then the No. 10 or No. 20 yellow paperboard shall be laid on the plate, and the two ends shall be screwed up. Drive and roll. After rolling out the print, check it. Lay paper on the light part or pad the plate with a paper strip. Don’t move it where the knife is heavy. Cover the bottom plate with thin kraft paper, insert the steel plate and tighten the screws.

Re pad the knife line: empty roll several times and then roll one piece of paper to check whether there is any place where the knife is blunt or the indentation line cannot come out. If there is such a phenomenon, it shall be padded. If all or part of the indentation line cannot come out, you can pad the back of the plate with a piece of paper. The bottom plate with heavy weight at both ends and light weight in the middle; The light at both ends and the heavy in the middle use a wire knife to dig out the heavy place of the bottom plate line print. However, it should not be excavated too small, and the knife can not affect the knife line of other parts.

Tom (oversea manager) Phone:0086 13303078975 / 17772697357(whatsapp,wechat,line)

Email :cartonmachine.tomwang@aliyun.com

https://www.wd-cartonmachine.com