The printing technology of the ink printing slotting machine is sexual. The difference between the ink printing machine and other ink printing machines is the porcelain roller. The ink scraper system software of the ink printing machine, the porcelain roller and the scraper cooperate with each other, which can make the ink content of the rubber stick stronger, and also because of this function, the ultra-clear actual effect can be achieved. After those functions are taken into account, some factors can be considered to achieve the desired actual effect.

Whether the sharpness of the ink scraper of the water ink printing machine, its burden and the touch of the plate directly affect the quality of packaging and printing. According to the adjustment of the ink supply system of the scraper in the specific application of the machine equipment, many printing technical problems can be solved. The following aspects will directly affect the ink supply system of the ink scraper of the water ink printing machine:

1、 Working pressure adjustment

The working pressure of the ink scraper of the ink press comes from the operation of the cylinder pressure, the size of the pressure, the soft strength of the blade, the angle of view between the blade and the printing plate, etc. The greater the angle of view between the ink scraper and the printing plate, the greater the working pressure will be.

If the working pressure is too high, communication will reduce the solution of ink, and the loss of printing plate and cutter head will also be very large. If the working pressure is too high, the problem of dirty plate will occur, and the scraper line will also occur.

2、 Sharpness of ink scraper of water ink printing machine

The sharpness of the ink scraper of the ink printing machine is important. The excessive sharpness of the ink scraper of the ink printing machine is very easy to cause the ink scraper wire of the ink printing machine, and it will also damage the printing plate. The blade angle of the ink scraper of the ink printing machine and the sharpness of the manufacturing process decision. A good ink scraper of the ink printing machine will clean the ink, and it is not easy to damage the printing plate.

3、 Distance between scraper and printing plate

The distance between the ink scraper and the printing plate of the ink printing machine should be smaller. The smaller the distance, the more wire will occur, and at the same time the transfer rate of the ink will be reduced. Excessive spacing increases the ink transfer rate, but it will cause dirty version problems.

The installation of the ink scraper of the ink press should be neat and should not be warped. During installation, check whether there is dirt on the knife slot and knife head. If the ink scraper of the ink press is not neat, there will be water drop-shaped packaging printing marks, and there will also be intermittent breaks. The above situation will also occur if there are sundries in the ink or if there is any problem with the quality of the ink.

4、 Move the ink scraper of the ink press

The movement of the ink scraper of the ink press is the primary cause of the knife line, and the primary cause of the knife line. When assembling and moving the ink scraper of the ink press, do a good job in several aspects in advance:

1. Keep the tool table clean and free of residual residue.

2. The whole process of the installation and use of the ink scraper of the water ink printing slotting machine should be careful. The ink scraper of the ink printing machine should face both sides of the anilox roll, and be fixed in the milling cutter gradually, then fix the screws on both sides, and then check whether the cutter head is leveled.

3. The tightening range of screws should be uniform, so that the amplitude of each screw is similar.

4. The ink scraper of the ink printing machine is an exhausted spare part. It is necessary to check whether the wound is damaged from time to time.

5. It is not easy to pack and print the newly made ink press immediately. The running-in period of the ink scraper system software of the ink press is at least three minutes or more.

If you are also interested in this machine,please don’t hesitate to contact us:

Overseas manager: Tom Wang

Email:cartonmachine.tomwang@aliyun.com

Phone/Wechat/Whatsapp:+86 13303078975