When using a semi automatic printer slotter die cutter machine to print products, it is important to pay attention to quality:

1. When printing, attention should be paid to printing safety. After placing the product on the printing operation platform, quickly remove both hands;

2. During the printing process, the product quality should be checked at any time to see if there are any dirty plates. If there are any, the main power must be turned off first, and then wiped clean;

3. When printing and picking up materials, for safety reasons, please pick up materials instead of extending your head into the support platform to pick up materials;

4. Before starting the Semi-automatic ink printing slotting die cutting machine, the sensitivity of the bumper must be manually measured, remember!

5. The off board height should be controlled to be consistent at all four corners;

6. Be careful when using the online version, and do not touch or scratch the screen version;

7. Please note when pouring ink:

A. Ink cannot be poured onto the printed pattern;

B. The label on the ink can should face towards the palm of the hand;

C. Hold the ink tank in one hand and block the edge of the tank with an ink knife in the other hand. After pouring, immediately use the knife to push the ink into the tank.

If you are also interested in this machine,please don’t hesitate to contact us:

Overseas manager: Tom Wang

Email:cartonmachine.tomwang@aliyun.com

Phone/Wechat/Whatsapp:+86 13303078975