The paper table of the machine is driven by the hydraulic oil pump, and the oil cylinder makes the lifting action. The upper and lower limit travel switches can effectively prevent the mechanical accidents caused by the lifting overrun; The photoelectric device can control the automatic rise to maintain the normal paper feeding height; The gap adjustment of the paper feeding wheel adopts an electric adjustment device, which is suitable for various types of corrugated boards with different thicknesses; The PLC programmable controller system is stable and reliable, and the AC servo motor controls the advance and stop of the paperboard to ensure the uniformity and accuracy of the nail distance; When nailing the box, it will be found that the above faults are easy to occur when the flat wire quality is poor, the wire feeding resistance is large, the wire feeding wheel spring is too loose or too tight, the fixing screw of the wire feeding wheel is loose, the guide rail is offset, the gear bite is skewed, the position of the bottom die and punch is incorrect, and the bottom die is obviously worn.

When the counting photoelectric induction intensity of the right baffle is too strong, the above faults are easy to occur. In this regard, the I-shaped knob on the side of the electric eye can be adjusted. Clockwise adjustment can increase the induction intensity, counterclockwise adjustment can reduce the induction intensity, and it is appropriate to adjust to normal induction, so that there is no abnormality after nailing. The solution is to adopt high-quality flat wire with good rigidity and smooth surface coating; Check whether each part of the feeding line is jammed due to poor adjustment; Adjust the relevant parts of the machine so that the wire feeding movement can be maintained easily and freely; Take corresponding repair or replacement measures for the severely worn bottom mold.

When there are staples in the stapling head of the nailing box carton machinery , it is often easy to affect the normal action of the clutch. You can disassemble the side cover of the stapling head, take out the punch for cleaning and cleaning, add lubricating oil and reinstall it; If the positioning of the set head is inaccurate, check whether F3 fuse 34-35 (AC), F9 fuse 50-51 (DC) and brake coil resistance wire (15 Ω) are normal; If the photoelectric induction switch of the upper stapling head baffle does not act and cannot sense the axis of the lower guide rail, resulting in nailing without feeding the paper, the induction distance of the photoelectric switch can be adjusted; If the nail head has continuous nailing action, check whether the electrical appliance is damaged.

If the photoelectric induction of the baffle is not normal, this fault is easy to occur. The photoelectric induction device can be adjusted to maintain an appropriate induction distance to ensure that the baffle can operate normally after the paperboard is sent. The automatic counting optical eye automatically counts the finished products and records the output, and can set the separation and delivery to cooperate with the end machine operation of the later section; The stapling head of the nail box machine is refined from special steel, which has wear-resistant and practical effect; The electric control system of the machine adopts color touch screen to provide a good man-machine interface to complete the automatic setting of nail distance, the setting or cancellation of reinforcing nail and fault finding.

Tom (oversea manager) Phone:0086 13303078975 / 17772697357(whatsapp,wechat,line)

Email :cartonmachine.tomwang@aliyun.com

https://www.wd-cartonmachine.com