What are the precautions for the operation of the high-speed automatic carton partition assembler inserting machine?

1. Strictly follow the operating procedures and use the equipment correctly. Prepare carefully before starting the high-speed partition assembling machine, check repeatedly when starting the equipment, adjust properly during operation, and handle properly after stopping the equipment. Carefully implement the operation indicators and do not allow overtemperature, overpressure, overspeed and overload operation.

2. It is necessary to master the prevention, judgment and emergency treatment measures of equipment failure, and keep the safety protection device in good condition.

3. Use the five-word operation method (listening, wiping, smelling, looking and comparing), hold three treasures (wrench, stethoscope and rag), carefully maintain and strictly patrol the system. Regularly check the equipment according to the patrol inspection route, find problems, solve them in time and eliminate hidden dangers. Clean, lubricate, tighten, adjust and prevent equipment. Ensure the integrity of parts, accessories and tools.

bottle carton packaging making partition assembly machine

4. Carefully fill in the equipment operation diary, operation record and defect record as required.

5. Operate the equipment according to the plan, switch it regularly, cooperate with the maintenance personnel to maintain the equipment, and ensure that the equipment is in good condition and can be started at any time. The standby equipment shall be rotated regularly, and anti-condensation and anti-freezing work shall be done well.

6. Ensure the cleanness of the equipment and environment, ensure that the bottom of the ditch and the shaft are visible, the equipment is visible, and the doors and windows are clean.

7. Do a good job in equipment lubrication. Strictly implement the petrochemical equipment lubrication management system and adhere to the five fixed points (3360 fixed points, fixed time, qualitative, quantitative and fixed person); The filter is completely good, from the oil receiving barrel to the rear oil storage barrel, from the rear oil storage barrel to the oil pot, and from the oil pot to the filling point). Clean and replace lubricating parts and oil tank regularly. Oil.

8. Operators must carefully implement the shift handover system.

9. The equipment maintenance personnel shall carry out patrol inspection on the equipment on time, deal with the problems once found, and cooperate with the operators to do a good job in safety.

10. The maintenance of all equipment, pipes and other equipment parts in the workshop must have a clear division of labor, and at the same time, timely antifreezing, anti-condensation, thermal insulation, cold insulation, prevention, plugging, etc.

If you are also interested in this machine,please don’t hesitate to contact us:

Overseas manager: Tom Wang

Email:cartonmachine.tomwang@aliyun.com

Phone/Wechat/Whatsapp:+86 13303078975